- General
- ModelGS1008P
- Ethernet Ports8× Gigabit RJ45 ports (Ports 1–4 with PoE+ support)
- PoE StandardsIEEE802.3af, IEEE802.3at
- PoE ModeMode A (Pins 1/2+, 3/6–)
- PoE Output per PortMax 30W
- Total PoE Power Budget60W
- Power SupplyDC 54V 1.11A
- Max Device Power Consumption5W
- Max Total Power Consumption60W
- Switching Capacity16 Gbps
- Packet Buffer4 Mbit
- MAC Address Table8192 entries
- Transfer ModeStore-and-forward
- Watchdog FunctionReboots inactive clients on ports 1–4 after 5 minutes (optional)
- Priority ModePrioritizes ports 1–2 for latency-sensitive apps (e.g., VoIP)
- Extend ModeExtends PoE on ports 1–4 up to 250 m at 10 Mbps
- Supported ProtocolsIEEE802.3i (10BASE-T), 802.3u (100BASE-TX), 802.3ab (1000BASE-T), 802.3x (Flow Control)
- Layer 2 FeaturesIGMP Snooping, Loop Prevention, Loop Detection, DSCP QoS, 802.1p QoS
- LED IndicatorsPower, Link/ACT, PoE status, PoE Max
- Copper Cable SupportCat 3 or higher: 100 m @ 10 Mbps; Cat 5e or higher: 100 m @ 1 Gbps; 250 m @ 10 Mbps in Extend mode
- Lightning/Surge ProtectionRJ45: CM 4kV, Power: DM 2kV / CM 4kV
- ESD ProtectionContact: 6kV, Air: 8kV
- Operating Temperature0~40°C
- Storage Temperature-40~70°C
- Operating Humidity10%–90% non-condensing
- Storage Humidity10%–95% non-condensing
- Dimensions155×86×26 mm (6.1×3.39×1.02 inches)
- CasingMetal
- Installation TypeDesktop, Wall-mount
SWITCHCUDYGS1008P
