- General
- ModelGS1018PS2
- Ethernet Ports16× Gigabit PoE ports, 2× Uplink Gigabit ports, 2× Gigabit SFP slots
- PoE StandardsIEEE802.3af (15.4W), IEEE802.3at (30W)
- PoE Output VoltageDC 44–57V
- PoE Power Supply CorePins 1/2 (+), 3/6 (–)
- Total PoE Power Budget180W
- Max Non-PoE Power Consumption10W
- Power Supply InputAC 100–240V, 50/60Hz; Output: 52V / 3.84A
- ChipsetEN8850DH, RTL8238B
- Switching Capacity40 Gbps
- Packet Forwarding Rate29.76 Mpps
- Packet Buffer3 Mbit
- MAC Address Table8K
- Transfer ModeStore-and-forward
- Supported ProtocolsIEEE802.3, 802.3u, 802.3ab, 802.3x, 802.3z
- Extend ModePorts 9–16 force 10 Mbps up to 250 m, watchdog enabled for ports 1–16
- PoE PriorityPrioritization enabled on ports 1–16 by default
- WatchdogEnabled in Extend mode (auto-reboots unresponsive clients)
- LED IndicatorsPWR, Link/ACT (1–20), PoE Power Status (1–16), DIP switch mode indicator
- LED PoE Status IndicatorGreen: normal; Flashing: 90–95%; Solid: 95–100% usage
- Cabling Support10BASE-T: Cat 3/4/5 UTP/STP (≤100m); 100/1000BASE-TX: Cat 5 or higher UTP/STP (≤100m)
- Optical Media SupportMultimode: 50/125, 62.5/125, 100/140 µm; Single-mode: 8/125, 8.7/125, 9/125, 10/125 µm
- Surge ProtectionMax 4KV (common mode)
- ESD ProtectionAir: 8KV, Contact: 6KV
- Operating Temperature-10°C ~ 50°C
- Storage Temperature-40°C ~ 70°C
- Operating Humidity10% ~ 90%, non-condensing
- Storage Humidity5% ~ 95%, non-condensing
- Dimensions320×207×44 mm
SWITCHCUDYGS1018PS2
