- General
- ModelIG1005
- Ethernet Ports5× 10/100/1000 Mbps shielded RJ45 ports
- Extend Mode PortsPorts 1–4 (250 m @ 10 Mbps in Extend Mode)
- VLAN Mode PortsPorts 1–4
- MAC Address Table8192 entries
- Switching Capacity10 Gbps
- Forwarding Rate7.44 Mpps
- Packet Buffer2 Mbit
- Jumbo Frame9 KB
- LED IndicatorsPower 1, Power 2, Link/ACT per port
- Power InputDual DC 9.6–60V via Phoenix 4-PIN Terminal
- Power ProtectionPolarity reverse protection, short circuit protection
- Power RedundancySupported (dual DC inputs)
- Max Power Consumption2.0W
- Idle Power Consumption1.4W
- Grounding MethodGrounding point
- Transfer MethodStore-and-Forward
- HousingAluminum alloy
- Ingress ProtectionIP40
- Installation TypeDIN-Rail (bracket integrated)
- Dimensions118×86×33.5 mm (4.65×3.39×1.32 inches)
- Weight318.6 g (11.24 oz.)
- Operating Temperature-40°C ~ 85°C
- Storage Temperature-40°C ~ 85°C
- Operating Humidity5% ~ 95% non-condensing
- Storage Humidity5% ~ 95% non-condensing
- Supported ProtocolsIEEE 802.3i (10BASE-T), 802.3u (100BASE-TX), 802.3ab (1000BASE-T), 802.3x (Flow Control)
- Surge & ESD ProtectionPower: DM 2kV, CM 4kV; RJ45: CM 6kV; ESD: Contact 8kV, Air 15kV
- EMC/EMS ComplianceIEC/EN 61000-4-2/3/4/5/6/8/9/10 (up to Level 5)
- EMI StandardsEN55032 Class A, EN55035 Class A, FCC 15B Class A
- Mechanical ResilienceShock: IEC 60068-2-27; Vibration: IEC 60068-2-6; Free fall: IEC 60068-2-32
- DIP Switch FunctionsVLAN On/Off, Extend On/Off, Broadcast Storm Prevention On/Off
SWITCHCUDYIG1005
