- General
- ModelGS105P
- Ethernet Ports4× Gigabit PoE+ ports, 1× Gigabit Uplink port
- PoE StandardsIEEE802.3af (15.4W), IEEE802.3at (30W)
- PoE Output VoltageDC 54V 0.66A
- Total PoE Power Budget36W (external power supply)
- PoE FeaturesWatchdog, Extend (250 m), VLAN for port isolation, Intelligent power management
- WatchdogReboots unresponsive PoE clients on ports 1–4 (after 5 min)
- Switch ModesDefault, VLAN, Extend (via DIP switch)
- Extend ModePorts 1–4 up to 250 m @ 10 Mbps
- QoSIEEE 802.1p, DSCP
- Flow ControlIEEE 802.3x
- MAC Address Table2048 entries
- Switching Capacity10 Gbps
- Forwarding Rate7.44 Mpps
- Jumbo Frame15 KB
- Packet Buffer3 Mbit
- Cable Support10BASE-T: Cat 3+, 100BASE-TX: Cat 5+, 1000BASE-T: Cat 5e+, Extend: Cat 5e+ (250 m @ 10 Mbps)
- LED IndicatorsPower (Green), Link/ACT (Green), PoE Status (Yellow), PoE Max (Red)
- Lightning/Surge ProtectionDM 2kV, CM 4kV
- ESD ProtectionAir: 8kV, Contact: 6kV
- Power ConsumptionIdle: 5W, Max: 36W
- Operating Temperature0°C ~ 40°C
- Storage Temperature-40°C ~ 75°C
- Operating Humidity0% ~ 100% non-condensing
- Storage Humidity10% ~ 95% non-condensing
- CasingMetal
- InstallationType Desktop, Wall-mount (with brackets)
- Dimensions119×85×28 mm (4.69×3.35×1.1 inches)
SWITCHCUDYGS105P
