- General
- Model VersionFS1018PS1 3.0
- 1.25G SFP Slots1
- Gigabit RJ45 Ports2
- 10/100 Mbps RJ45 Ports16
- 10/100 Mbps RJ45 PoE Ports#1~#16
- Max Power on a Single PoE Port30W
- PoE Port NotesComplies with IEEE 802.3at/af standards
- Extend Mode Ports#1~#16
- VLAN Mode Ports#1~#16
- LED IndicatorsPower, Link/ACT of Each Ethernet Port, DIP Mode (SW)
- Power InputAC Inlet
- Physical ButtonsVLAN/Default/Extend DIP Switch
- Copper Speed and DistanceCat. 3+: 100m @ 10 Mbps, Cat. 5+: 100m @ 100 Mbps, Cat. 5e+: 100m @ Gigabit, 250m @ 10 Mbps (Extend Mode only)
- Copper Speed NoteGigabit only on uplink ports; 250m transmission only in Extend Mode
- Optical Spec and DistanceDepends on installed optical module
- MAC Address Table2048
- Max Switching Capacity9.2 Gbps
- Max Forwarding Rate6.844 Mpps
- Packet Buffer3 Mbit
- Power MethodsAC
- AC Input100–240V~, 50/60Hz
- Power Supply200W
- Max Power Excluding PoE6W
- 802.3 Protocols802.3i 10BASE-T, 802.3u 100BASE-TX, 802.3ab 1000BASE-T, 802.3z 1000BASE-X, 802.3x Flow Control, 802.3af PoE, 802.3at PoE
- Grounding MethodsThree-Prong Plug, Grounding Point
- Operating Temperature0~40 ℃ (32~104 ℉)
- Storage Temperature-40~70℃ (-40~158 ℉)
- Operating Humidity10~90% non-condensing
- Storage Humidity10~95% non-condensing
- Dimensions320×207×45 mm (12.6×8.15×1.77 inches)
- Product Weight1623 g (57.25 oz.)
- Casing MaterialMetal
- Installation OptionsDesktop, Rackmount via Brackets
- Package ContentFS1018PS1, Power Cord, Mounting Kit, Installation Guide
SWITCHCUDYFS1018PS1
