- General
- ModelIF1005
- Ethernet Ports5× 10/100 Mbps shielded RJ45 ports
- Extend ModePorts 1–4 support up to 250 m @ 10 Mbps with Cat 5e or better
- VLAN ModePorts 1–4 isolated when enabled
- LED IndicatorsPower 1, Power 2, Link/ACT per Ethernet port
- Power InputDual DC 9.6–60V via Phoenix Terminal 4-PIN
- Power ProtectionPolarity reverse protection, Short circuit protection
- Power RedundancySupported (dual DC)
- Max Power Consumption0.9W
- Idle Power Consumption0.25W
- MAC Address Table2048 entries
- Switching Capacity1 Gbps
- Forwarding Rate0.744 Mpps
- Packet Buffer768 Kbit
- Jumbo Frame2 KB
- ProtocolsIEEE 802.3i (10BASE-T), 802.3u (100BASE-TX)
- Copper Cable Distances100m @ 10 Mbps (Cat 3+), 100m @ 100 Mbps (Cat 5+), 250m @ 10 Mbps (Cat 5e+ in Extend mode)
- Hardware FeaturesDIP switch for VLAN, Extend, Broadcast Storm Prevention
- HousingAluminum alloy with IP40 protection
- MountingDIN-Rail (bracket integrated)
- GroundingGrounding point available
- Operating Temperature-40°C ~ 85°C
- Storage Temperature-40°C ~ 85°C
- Operating Humidity5% ~ 95% non-condensing
- Storage Humidity5% ~ 95% non-condensing
- Dimensions118×86×33.5 mm (4.65×3.39×1.32 inches)
- Weight310.3 g (10.95 oz)
- CertificationsIEC/EN 62368, EN55032/35 Class A, FCC Part 15B Class A
- ESD ProtectionContact: 8kV, Air: 15kV
- Surge ProtectionPower: DM 2kV, CM 4kV; RJ45: CM 6kV
- EMC StandardsIEC/EN 61000-4-2/3/4/5/6/8/9/10
- Shock/VibrationIEC 60068-2-27/2-6
- Free FallIEC 60068-2-32
SWITCHCUDYIF1005
