Motion detector LX-402
Passive Infrared detection method, Coverage: 40 zones (Multi-level area), 18 zones (Pet alley area), Detection speed: 0.3 - 1.0 m/sec., Alarm period: 2 +/- 1 sec. (delay timer), Tamper switch: Opens when cover...
Passive Infrared detection method, Coverage: 40 zones (Multi-level area), 18 zones (Pet alley area), Detection speed: 0.3 - 1.0 m/sec., Alarm period: 2 +/- 1 sec. (delay timer), Tamper switch: Opens when cover...
Sticker for Bentel J4 ** series fire extinguisher control panel Bentel J400-REP.
Sticker for fire control panel J408 - Lithuanian
Sticker for fire control panel J424 - English
Sticker for fire control panel J424 - Lithuanian
FC601P detector is capable of detecting the visible smoke produced by materials which smoulder or burn slowly, i.e. soft furnishings, plastic foam etc.; or ‘smoke’ produced by overheated but unburnt PVC. These...
FC601P detector is capable of detecting the visible smoke produced by materials which smoulder or burn slowly, i.e. soft furnishings, plastic foam etc.; or ‘smoke’ produced by overheated but unburnt PVC. These...
Photo Detector ID100, Iris; programmable; power supply 10-30 V DC; current consumption standby 90 μA; current consumption in alarm 40 mA; remote output current consumption max. 14 mA.
Iris and Enea detectors mouting base.
Addressable input output module Enea; power supply 19-30 V DC; current draw in standby status max. 80 μA @27.6 VDC;
The BAW50T24 is a power supply unit and battery charger for use with appliances that require a regulated voltage of 27.6 V and a maximum current of 1,5 A. Its power output is protected against overload, shortcircuit...
This module is designed to connect external devices, traffic lights, LED strip
For range extension up to 30m Frequency: 433/868 MHz Impedance: 50Ω Gain (db): 2.1
Nylon rack for sliding gates, 28x20x1000 mm, with fixing screws
Steel rack for sliding gates, 30x12x1000 mm, with fixing screws
The ERREKA FT08 reflective photocell is a reliable and efficient solution for gate and door safety. With its built-in reflector, no additional receiver is required, making installation easier. It operates using...
Designed to connect the LED strip to the automatic barrier AC/DC OUT - 12VDC/2A The set includes: Power source AUL10-1, control module 65-AEPS1-001, cable AUL10-2
6m bar with LED RGB illumination White bar with red reflectors
Support that holds the bar in the closed position
The ERREKA FT06 is a compact wall‑mounted photocell unit (transmitter + receiver) designed for obstacle detection in automatic door and gate systems. Powered by 12–24 Vac or 12–36 Vdc, offers up to 30 m range, with...
The ERREKA FT08 reflective photocell is a reliable and efficient solution for gate and door safety. With its built-in reflector, no additional receiver is required, making installation easier. It operates using...