Zigbee Smart Wall switch Sonoff ZBM5-3C-86W
Technical details:
Minimum load: 3 W (no neutral wire required)
Wireless connection: Zigbee 3.0
Colour: white
Housing material: PC+CRS
Operating temperature: -10°C~40°C
Dimensions: 87x87x40.2mm
Zigbee 3.0 and Matter support works with a wide range of Zigbee hubs (e.g., SONOFF ZB Bridge-P/U, NSPanel Pro, iHost, ZBDongle-P/E) and platforms, including eWeLink, Home Assistant, and Zigbee2MQTT.
Detach relay mode – when enabled, the physical switch does not interrupt the DC power supply to the išmy LEDs, they remain connected and controlled while the switch is physically connected.
Local and remote control – includes physical buttons, eWeLink/Other Zigbee platforms, timed scripts, voice assistants (Google, Alexa).
Zigbee router function (with neutral line) – helps extend the coverage of the home Zigbee network.
Modern mechanical design – analogue SONOFF SwitchMan M5, aesthetically pleasing and suitable for European comms boxes.
Control of two groups of controls – approx. 3 channels allow separate control of, e.g., the upper and lower room controls.
Upgrading of wall switches – suitable for replacing conventional mechanical switches, provides remote control, voice support and automation.
Motion sensor scenarios – switching on when motion is detected (in corridors, bathrooms) and switching off at night or in case of inactivity.
Network Boosting – the device acts as a Zigbee router, boosting network coverage when connected with a neutral wire.
Automated localisation control – time settings („evening on“, „morning on“), conditions („if it's dark, turn on“), integration with other sensors.
Used for small appliances – e.g. fans or small devices.
