The SOLO 100 is a fiberglass telescopic pole extending to 4.5 m, designed for safe and effective floor-level testing of smoke, heat, and CO detectors. Lightweight, strong, non-conductive, and simple to operate –...
The SOLO 101 is a 1.13 m fiberglass extension pole, designed to be used with SOLO 100 or SOLO 108 telescopic poles. Lightweight (~0.55 kg), sturdy and non-conductive – perfect for detector testing at heights up to 9 m.
SOLO 200 is a universal detector removal tool compatible with SOLO access poles. Color-coded rotating heads adjust to fit detectors 65–110 mm in diameter, including angled ceiling installations.
SOLO 330 is a universal aerosol test head with transparent cup, suitable for smoke detectors up to 100 mm diameter. Compatible with SOLO poles and SOLO A5 / A10 aerosols. UL certified.
SOLO 461 is a cordless heat detector test kit, including the SOLO 460 head, two SOLO 770 battery batons and 727 fast charger. Enables testing up to 90 °C with SOLO access poles at heights up to 9 m. UL certified.
SOLO 770 is a high-capacity 3000 mAh NiMH battery for SOLO 460/461 heat detector testers. Provides approximately 50 test cycles per charge.
SOLO A5 is a 250 ml flammable aerosol for functional smoke detector testing with SOLO 330 or 332 dispensers. Approved by manufacturers, leaves no residue, UL certified.
SOLO C3 is a 250 ml non-flammable CO aerosol for testing CO fire detectors using SOLO 330/332 dispensers. It provides safe, controlled CO delivery for functional activation.
This module is designed to connect external devices, traffic lights, LED strip
For range extension up to 30m Frequency: 433/868 MHz Impedance: 50Ω Gain (db): 2.1
Nylon rack for sliding gates, 28x20x1000 mm, with fixing screws
Steel rack for sliding gates, 30x12x1000 mm, with fixing screws
The ERREKA FT08 reflective photocell is a reliable and efficient solution for gate and door safety. With its built-in reflector, no additional receiver is required, making installation easier. It operates using...
Designed to connect the LED strip to the automatic barrier AC/DC OUT - 12VDC/2A The set includes: Power source AUL10-1, control module 65-AEPS1-001, cable AUL10-2
6m bar with LED RGB illumination White bar with red reflectors
Support that holds the bar in the closed position
The ERREKA FT06 is a compact wall‑mounted photocell unit (transmitter + receiver) designed for obstacle detection in automatic door and gate systems. Powered by 12–24 Vac or 12–36 Vdc, offers up to 30 m range, with...
The ERREKA FT08 reflective photocell is a reliable and efficient solution for gate and door safety. With its built-in reflector, no additional receiver is required, making installation easier. It operates using...
Attractive design Two channel Operating frequency 433.92MHz Programmable by cable through IRPROGM manual console or IRTAGPROG computer Option to register manually High range
Attractive design Four channel Operating frequency 433.92MHz Programmable by cable through IRPROGM manual console or IRTAGPROG computer Option to register manually High range
Two-channel plug-in receiver (second channel, pedestrian opening) Option of fixed code and roller code Operating frequency 433.92MHz Up to 250 transmitters memory
Attractive design Two channel Operating frequency 433.92MHz High range
Dimensions: Ø90x126mm Multi-voltage power 12-24V AC/DC and 85-235V AC Built-in antenna 433.92MHz Built-in flashing function, 1 second interval Energy-saving white LEDs Horizontal or vertical...
