Smoke detector IRIS ID100, INIM
Photo Detector ID100, Iris; programmable; power supply 10-30 V DC; current consumption standby 90 μA; current consumption in alarm 40 mA; remote output current consumption max. 14 mA.
Standard base for FD8000 series detectors, UNIPOS
Standard base for FD8000 series sensors
Mounting base for ENEA/IRIS detector, white, INIM
Iris and Enea detectors mouting base.
Addressable 1IN/1OUT module, Enea, INIM
Addressable input output module Enea; power supply 19-30 V DC; current draw in standby status max. 80 μA @27.6 VDC;
Control module, for connecting and controlling LED strips and traffic
This module is designed to connect external devices, traffic lights, LED strip
External antenna for automatic barrier, ERREKA
For range extension up to 30m Frequency: 433/868 MHz Impedance: 50Ω Gain (db): 2.1
Nylon rack 28x20x1000 mm, with fixing screws, ERREKA
Nylon rack for sliding gates, 28x20x1000 mm, with fixing screws
Steel rack 30x12x1000 mm, ERREKA
Steel rack for sliding gates, 30x12x1000 mm, with fixing screws
Metal protection for photocell FT08, ERREKA
The ERREKA FT08 reflective photocell is a reliable and efficient solution for gate and door safety. With its built-in reflector, no additional receiver is required, making installation easier. It operates using...
LED RGB illumination control set, ERREKA
Designed to connect the LED strip to the automatic barrier AC/DC OUT - 12VDC/2A The set includes: Power source AUL10-1, control module 65-AEPS1-001, cable AUL10-2
Aluminium 6m bar with red reflectors and LED illumination, ERREKA
6m bar with LED RGB illumination White bar with red reflectors
Bar support for automatic barrier, ERREKA
Support that holds the bar in the closed position
Photocell set, FT06, ERREKA
The ERREKA FT06 is a compact wall‑mounted photocell unit (transmitter + receiver) designed for obstacle detection in automatic door and gate systems. Powered by 12–24 Vac or 12–36 Vdc, offers up to 30 m range, with...
Reflective photocell, FT08, ERREKA
The ERREKA FT08 reflective photocell is a reliable and efficient solution for gate and door safety. With its built-in reflector, no additional receiver is required, making installation easier. It operates using...
Roller code transmitter, 2 channel, 433,92MHz, ERREKA
Attractive design Two channel Operating frequency 433.92MHz Programmable by cable through IRPROGM manual console or IRTAGPROG computer Option to register manually High range
Roller code transmitter, 4 channel, 433,92MHz, ERREKA
Attractive design Four channel Operating frequency 433.92MHz Programmable by cable through IRPROGM manual console or IRTAGPROG computer Option to register manually High range
Fixed and roller code receiver with 2 channels, 433,92MHz, ERREKA
Two-channel plug-in receiver (second channel, pedestrian opening) Option of fixed code and roller code Operating frequency 433.92MHz Up to 250 transmitters memory
Roller code transmitter LIRA, 2 channel, 433,92MHz, ERREKA
Attractive design Two channel Operating frequency 433.92MHz High range





