Smoke detector IRIS ID100, INIM
Photo Detector ID100, Iris; programmable; power supply 10-30 V DC; current consumption standby 90 μA; current consumption in alarm 40 mA; remote output current consumption max. 14 mA.
Fiberglass Telescopic Pole, 4,5m, SOLO 100
The SOLO 100 is a fiberglass telescopic pole extending to 4.5 m, designed for safe and effective floor-level testing of smoke, heat, and CO detectors. Lightweight, strong, non-conductive, and simple to operate –...
Extension pole 1.13 m fiberglass, SOLO 101
The SOLO 101 is a 1.13 m fiberglass extension pole, designed to be used with SOLO 100 or SOLO 108 telescopic poles. Lightweight (~0.55 kg), sturdy and non-conductive – perfect for detector testing at heights up to 9 m.
Universal detector removal tool, SOLO 200
SOLO 200 is a universal detector removal tool compatible with SOLO access poles. Color-coded rotating heads adjust to fit detectors 65–110 mm in diameter, including angled ceiling installations.
Smoke detector test head, SOLO 330
SOLO 330 is a universal aerosol test head with transparent cup, suitable for smoke detectors up to 100 mm diameter. Compatible with SOLO poles and SOLO A5 / A10 aerosols. UL certified.
Cordless Heat Detector Test Kit, SOLO 461
SOLO 461 is a cordless heat detector test kit, including the SOLO 460 head, two SOLO 770 battery batons and 727 fast charger. Enables testing up to 90 °C with SOLO access poles at heights up to 9 m. UL certified.
Heat detector tester battery, SOLO 770
SOLO 770 is a high-capacity 3000 mAh NiMH battery for SOLO 460/461 heat detector testers. Provides approximately 50 test cycles per charge.
Smoke detector aerosol tester, A5, 250ml, SOLO
SOLO A5 is a 250 ml flammable aerosol for functional smoke detector testing with SOLO 330 or 332 dispensers. Approved by manufacturers, leaves no residue, UL certified.
CO detector aerosol tester, C3, 250ml, SOLO
SOLO C3 is a 250 ml non-flammable CO aerosol for testing CO fire detectors using SOLO 330/332 dispensers. It provides safe, controlled CO delivery for functional activation.
Mounting base for ENEA/IRIS detector, white, INIM
Iris and Enea detectors mouting base.
Addressable 1IN/1OUT module, Enea, INIM
Addressable input output module Enea; power supply 19-30 V DC; current draw in standby status max. 80 μA @27.6 VDC;
Control module, for connecting and controlling LED strips and traffic
This module is designed to connect external devices, traffic lights, LED strip
External antenna for automatic barrier, ERREKA
For range extension up to 30m Frequency: 433/868 MHz Impedance: 50Ω Gain (db): 2.1
Nylon rack 28x20x1000 mm, with fixing screws, ERREKA
Nylon rack for sliding gates, 28x20x1000 mm, with fixing screws
Steel rack 30x12x1000 mm, ERREKA
Steel rack for sliding gates, 30x12x1000 mm, with fixing screws
Metal protection for photocell FT08, ERREKA
The ERREKA FT08 reflective photocell is a reliable and efficient solution for gate and door safety. With its built-in reflector, no additional receiver is required, making installation easier. It operates using...
LED RGB illumination control set, ERREKA
Designed to connect the LED strip to the automatic barrier AC/DC OUT - 12VDC/2A The set includes: Power source AUL10-1, control module 65-AEPS1-001, cable AUL10-2
Aluminium 6m bar with red reflectors and LED illumination, ERREKA
6m bar with LED RGB illumination White bar with red reflectors
Bar support for automatic barrier, ERREKA
Support that holds the bar in the closed position
Photocell set, FT06, ERREKA
The ERREKA FT06 is a compact wall‑mounted photocell unit (transmitter + receiver) designed for obstacle detection in automatic door and gate systems. Powered by 12–24 Vac or 12–36 Vdc, offers up to 30 m range, with...
Reflective photocell, FT08, ERREKA
The ERREKA FT08 reflective photocell is a reliable and efficient solution for gate and door safety. With its built-in reflector, no additional receiver is required, making installation easier. It operates using...
Roller code transmitter, 2 channel, 433,92MHz, ERREKA
Attractive design Two channel Operating frequency 433.92MHz Programmable by cable through IRPROGM manual console or IRTAGPROG computer Option to register manually High range





