Active filters
Passive Infrared detection method, Coverage: 40 zones (Multi-level area), 18 zones (Pet alley area), Detection speed: 0.3 - 1.0 m/sec., Alarm period: 2 +/- 1 sec. (delay timer), Tamper switch: Opens when cover...
Photo Detector ID100, Iris; programmable; power supply 10-30 V DC; current consumption standby 90 μA; current consumption in alarm 40 mA; remote output current consumption max. 14 mA.
The SOLO 100 is a fiberglass telescopic pole extending to 4.5 m, designed for safe and effective floor-level testing of smoke, heat, and CO detectors. Lightweight, strong, non-conductive, and simple to operate –...
The SOLO 101 is a 1.13 m fiberglass extension pole, designed to be used with SOLO 100 or SOLO 108 telescopic poles. Lightweight (~0.55 kg), sturdy and non-conductive – perfect for detector testing at heights up to 9 m.
SOLO 200 is a universal detector removal tool compatible with SOLO access poles. Color-coded rotating heads adjust to fit detectors 65–110 mm in diameter, including angled ceiling installations.
SOLO 330 is a universal aerosol test head with transparent cup, suitable for smoke detectors up to 100 mm diameter. Compatible with SOLO poles and SOLO A5 / A10 aerosols. UL certified.
SOLO 461 is a cordless heat detector test kit, including the SOLO 460 head, two SOLO 770 battery batons and 727 fast charger. Enables testing up to 90 °C with SOLO access poles at heights up to 9 m. UL certified.
SOLO 770 is a high-capacity 3000 mAh NiMH battery for SOLO 460/461 heat detector testers. Provides approximately 50 test cycles per charge.
SOLO A5 is a 250 ml flammable aerosol for functional smoke detector testing with SOLO 330 or 332 dispensers. Approved by manufacturers, leaves no residue, UL certified.
SOLO C3 is a 250 ml non-flammable CO aerosol for testing CO fire detectors using SOLO 330/332 dispensers. It provides safe, controlled CO delivery for functional activation.
Iris and Enea detectors mouting base.
Addressable input output module Enea; power supply 19-30 V DC; current draw in standby status max. 80 μA @27.6 VDC;
COMMAX DP-2S is an analog audio door phone handset powered by 220 V AC, featuring a non-polarity 2-wire interface and built-in door release control. Operating range up to 100–150 m (wire-dependent),...
The aluminum flush-mounted door-entry call panel COMMAX DR-201A is designed for a single subscriber. Durable aluminum housing combined with a sleek design and functional operation: single-button call, flush box...
The COMMAX DR-201AG is a flush-mount aluminum door entry call panel for two users . It features dedicated call buttons with nameplates plus an integrated speaker and microphone for clear audio. Designed for wired,...
