Active filters
Ethernet communicator compatible with Paradox, DSC, Caddx, Pyronix and other manufacturer control panels, reading messages directly from control panel DATA BUS.
Connects to supported DSC, Honeywell, Paradox, Pyronix, UTC Interlogix (Caddx), Innerrange and Texecom alarm panels via serial or keypad bus. Transmits full event information to the security company’s monitoring...
Connects to supported DSC, Honeywell, Paradox, Pyronix, UTC Interlogix (Caddx), Innerrange and Texecom alarm panels via serial or keypad bus. Transmits full event information to the security company’s monitoring...
“Ethernet” communicator E16 directly connects to supported DSC, Paradox, UTC Interlogix (CADDX), Innerrange, Texecom, Honeywell, Crow and Pyronix alarm panels. Communicator transmits full event information to...
FLEXi SP3 control panel board, built into metal housing (285 x 280 x 80 mm) Metal housing K01 with 40 VA transformer Resistor 2,2 kΩ Two antennas, cellular and Wi-Fi with 2,5 m long cables Wire for...
Transmission frequency 868 MHz Modulation type GFSK Power supply 10-28VDC Current consumption 50 mA (on standby) Up to 150 mA (while sending data) Message encryption Yes Range in open space Up to 300 m...
Connects to any alarm panel which has a landline dialer. Transmits full event information to the security company’s monitoring station. Works with Protegus app. Users can arm/disarm their alarm system remotely and...
T10 is a data transmitting device for transmitting information of intruder and fire alarm control panel to monitoring and alarm receiving centre (MARC) at a licensed VHF radio frequency.
Communicator E16T is intended to upgrade any intruder alarm panel with telephone line communicator (TIP RING) for event signaling via wired Internet (Ethernet). Customers are informed about security system events...
Increase the number of inputs and outputs in a compatible TRIKDIS device.
Expansion module for 8 zones, TRIKDIS
