Mounting bracket for PATROL motion detector, GSN
Compatible with Patrol: 203PET, 403PET, 103PET, 105PET, 703, 803, 803PET, 903
Compatible with Patrol: 203PET, 403PET, 103PET, 105PET, 703, 803, 803PET, 903
The SIM-360 is a 4-element passive infrared intrusion detector for use in electronic security systems in ceiling mount applications.
Digital PIR Detector The SIM-PI detector uses a special designed optical Lens with unique Quad (Four element) PIRSensor and ASIC based electronics optimized to eliminate false alarms, caused by small animals and...
Passive infrared shock & breakage detector with pet immunity.
The SIM-03 is a combination of Passive Infra-Red (PIR) and Microwave Doppler detectors, with PET immune function and anti-mask. The SIM-03 use Microcontroller for PIR signal analyzing, special ASIC technology for PIR...
The SIM-04 is a combination of PIR & MW detectors, with PET immune function, providing protection from intruders by PYRO sensor element and MW (based on Doppler concept).
PIR/microwave outdoor motion detector. The SIM-110 is a unique motion detector utilizing a single passive infra-red element and Microwave technology and is designed for outdoor use in the most severe climatic...
Dual PIR/microwave outdoor motion detector. The SIM-120 is a unique motion detector utilizing dual passive infra-red elements and Microwave technology and is designed for outdoor use in the most severe climatic...
Unique signal analysis ignores environmental and disturbances; Sensitivity adjustment; New ultra compact design; Wall mount installation; Outstanding detection range and reliability; A frequency analysis circuit...
Other Functions Up to 40 transmitters, Supply Voltage 12 V DC.
TWO INDEPENDENT CHANNEL FIVE OPERATING MODES OF EACH RECEIVER CHANNEL: 1. PULSE MODE - 1SECOND, 2. SWITCH ON PERIOD MODE (1 – 300 sec) 3. SWITCHING MODE (ON/OFF) 4. HOLD MODE (CONTINUOUS) 5. PANIC BUTTON MODE...
Wireless zone and PGM output expansion module EW2
EWD2 is used to protect door, windows and other opening or sliding mechanisms: drawers, bar cabinets. This device comes with a built-in shock sensor which helps to detect a break-in attempt before opening.
EWD2 is used to protect door, windows and other opening or sliding mechanisms: drawers, bar cabinets. This device comes with a built-in shock sensor which helps to detect a break-in attempt before opening.
Photoelectric smoke detector EWF1 contains sensitive sensor. It is effective in detecting smouldering fires.
EWK2 is a wireless device intended to remotely arm and disarm ELDES alarm system or to control any electric appliance connected to the alarm system’s PGM output.
EWK2 is a wireless device intended to remotely arm and disarm ELDES alarm system or to control any electric appliance connected to the alarm system’s PGM output.
EWK2 is a wireless device intended to remotely arm and disarm ELDES alarm system or to control any electric appliance connected to the alarm system’s PGM output.
EWM1 is a great device to start creating your Smart Home Solution. Remotely control your home appliances, monitor electricity consumption, create schedules and different scenarios according to your needs with EWM1....