Motion detector SIM-360, ceiling-mount, SIM
The SIM-360 is a 4-element passive infrared intrusion detector for use in electronic security systems in ceiling mount applications.
The SIM-360 is a 4-element passive infrared intrusion detector for use in electronic security systems in ceiling mount applications.
Digital PIR Detector The SIM-PI detector uses a special designed optical Lens with unique Quad (Four element) PIRSensor and ASIC based electronics optimized to eliminate false alarms, caused by small animals and...
Passive infrared shock & breakage detector with pet immunity.
The SIM-03 is a combination of Passive Infra-Red (PIR) and Microwave Doppler detectors, with PET immune function and anti-mask. The SIM-03 use Microcontroller for PIR signal analyzing, special ASIC technology for PIR...
The SIM-04 is a combination of PIR & MW detectors, with PET immune function, providing protection from intruders by PYRO sensor element and MW (based on Doppler concept).
PIR/microwave outdoor motion detector. The SIM-110 is a unique motion detector utilizing a single passive infra-red element and Microwave technology and is designed for outdoor use in the most severe climatic...
Dual PIR/microwave outdoor motion detector. The SIM-120 is a unique motion detector utilizing dual passive infra-red elements and Microwave technology and is designed for outdoor use in the most severe climatic...
Unique signal analysis ignores environmental and disturbances; Sensitivity adjustment; New ultra compact design; Wall mount installation; Outstanding detection range and reliability; A frequency analysis circuit...
Relay module AWZ510, Voltage of the relay’s coil 10÷16V DC/ 10÷13V AC (-/+5%), Current of the relay’s coil 33mA@12VDC.
Relay module (12V), Max current 1A, Voltage 30VDC / 50VAC max.
Easily installed on any ceiling our detectors deliver industry-leading performance sensitivity and long-term reliability to protect offices or large warehouses with high rejection of false alarms and excellent...
The relay module MS (AWZ 511) is designed for used in low9voltage circuits. They are intended for indicating status, i. e. in alarm and access control systems. The module can be used to control devices which draw...
Relay module AWZ529, Number of relay outputs: 2 , Power supply: 10 ... 14 V DC.