Active filters
Passive Infrared detection method, Coverage: 40 zones (Multi-level area), 18 zones (Pet alley area), Detection speed: 0.3 - 1.0 m/sec., Alarm period: 2 +/- 1 sec. (delay timer), Tamper switch: Opens when cover...
Photo Detector ID100, Iris; programmable; power supply 10-30 V DC; current consumption standby 90 μA; current consumption in alarm 40 mA; remote output current consumption max. 14 mA.
Standard base for FD8000 series sensors
Iris and Enea detectors mouting base.
Addressable input output module Enea; power supply 19-30 V DC; current draw in standby status max. 80 μA @27.6 VDC;
This module is designed to connect external devices, traffic lights, LED strip
For range extension up to 30m Frequency: 433/868 MHz Impedance: 50Ω Gain (db): 2.1
Nylon rack for sliding gates, 28x20x1000 mm, with fixing screws
Steel rack for sliding gates, 30x12x1000 mm, with fixing screws
The ERREKA FT08 reflective photocell is a reliable and efficient solution for gate and door safety. With its built-in reflector, no additional receiver is required, making installation easier. It operates using...
Designed to connect the LED strip to the automatic barrier AC/DC OUT - 12VDC/2A The set includes: Power source AUL10-1, control module 65-AEPS1-001, cable AUL10-2
6m bar with LED RGB illumination White bar with red reflectors
Support that holds the bar in the closed position
The ERREKA FT06 is a compact wall‑mounted photocell unit (transmitter + receiver) designed for obstacle detection in automatic door and gate systems. Powered by 12–24 Vac or 12–36 Vdc, offers up to 30 m range, with...
The ERREKA FT08 reflective photocell is a reliable and efficient solution for gate and door safety. With its built-in reflector, no additional receiver is required, making installation easier. It operates using...
Attractive design Two channel Operating frequency 433.92MHz Programmable by cable through IRPROGM manual console or IRTAGPROG computer Option to register manually High range
Attractive design Four channel Operating frequency 433.92MHz Programmable by cable through IRPROGM manual console or IRTAGPROG computer Option to register manually High range
Two-channel plug-in receiver (second channel, pedestrian opening) Option of fixed code and roller code Operating frequency 433.92MHz Up to 250 transmitters memory
