Relay module for 2-wire fire detectors connection
Relay module is designed to connect 2-wire fire detectors to the control panel
Relay module AWZ510
Relay module AWZ510, Voltage of the relay’s coil 10÷16V DC/ 10÷13V AC (-/+5%), Current of the relay’s coil 33mA@12VDC.
Relay module (12V)
Relay module (12V), Max current 1A, Voltage 30VDC / 50VAC max.
Network card TCP / IP, SmartLAN485, INIM
Ethernet interface board. Allows you to program the control panel and perform monitoring remotely - via an Ethernet network.
Smoke detector IRIS ID100, INIM
Photo Detector ID100, Iris; programmable; power supply 10-30 V DC; current consumption standby 90 μA; current consumption in alarm 40 mA; remote output current consumption max. 14 mA.
Centralė, 2 kilpų, 240 adr. PREVIDIA C200L
2-loop non-expandable addressable fire control panel; 240 addresses in the loop; Large housing containing 2x17Ah battery; 4.3 "touch screen; TCP / IP connection for programming and network operations; HORNET +...
Relay module AWZ511
The relay module MS (AWZ 511) is designed for used in low9voltage circuits. They are intended for indicating status, i. e. in alarm and access control systems. The module can be used to control devices which draw...
Relay module AWZ529
Relay module AWZ529, Number of relay outputs: 2 , Power supply: 10 ... 14 V DC.